FS: Things I have left.

[James Earl]

Hey,
I still have:

A polished set of valve covers for a 7m-gte.
A set of mint 89+ tails. (SOLD!)
A not so mint set of 89+ tails. (the ends are good but there is a bit missing from the middle part)
N/A dash cluster.(ready for the boost gauge mod)
AFM with electronics (I was thinking of polishing that too)
3 boxes of interior stuff, some switches & panels. (grey)
OEM R154 flywheel
1 used front rotor not on bad shape (other calliper seized so I replaced both sides) cheap not warped.
2 sets for front brake pads. (not used too much before the calliper seized) cheap fix if you need em.
TSRM 1988 Supra MK3 (good shape)
TSRM 1988 Supra MK3 (fair shape)
Toyota electrical schematics book (1990 MK3 I think)

All reasonable offers looked at.

I have more but I will not find em till I clean out the garage.

[James Earl]

bizzzump

[dualtips]

don't seem like anyone is very interesed earl

[James Earl]

only been up for a day or two.

it will come.

[James Earl]

Bump!

[supra_man89]

earl,

you say you have an 89 spoiler ?, i might be interested, how much were you looking for ??

Corey

[supra_man89]

for the mint one haha :jump:

[James Earl]

This?
A set of mint 89+ tails. ( very nice) Not the wing...it was sold forever ago. LOL
Make an offer if you want them.
They are the tail lights that go across the back of the car like this:

http://img397.imageshack.us/img397/222/dsc012615mp.jpg

This is Anthony's car by the way it's for sale just like this. (Bump 4 U *wink*)

[ELNagro]

earl, sell me the center section for $10!! and what all interior pieces do u have???

[James Earl]

little bits of this and that...i have 2 cover doors fro the jack compartment or antenna comp in the back of the car. a couple of fuse box covers like the one down by the clutch. An glovebox. 3 rear speaker covers. a trunk side bucket. a passanger or driver piller cover or 2. the fabric panels that go under the rear outside arm rests. 2 console covers (cig lghter & radio surround)

Like I said stuff you need to come by and look one day or send pics of what you want and I can look. Thats how Steve got his switches so fast...and for a good price.

Url

[ELNagro]

hmmm i might be interested in the centre console, If i cant find a moderatly full interior I am goin to just sell/throw the tan in the garbage and run a decent gut lol

[jurkey77]

ill take the 89+ tail lights
i dont know how much they go for but im sure you'll ask for a reasonable price
do u have pics of both the mint and not so mint tails?

[James Earl]

Jurkey,
Sorry no pictures but the mint set shine and look close to factory new. The not so mint set, the tails are good, but the center bit has a big chunk missing of the red. it's about 2 inches wide and 1 inch thick. This set is good for someone who needs the ends replaced.

I looked through the Supra sites and they go for $125 ~ $140 US + shipping & duty tax's. Are you good with $100? I bought them way back when they went for double that on ebay. The good news is I have noticed a real drop in part costs for the MK3's in the last year. Front strut bars started at $245 US and were non-adjustable. Go figure they are $50 now. :sob:

Are you going to be around for coffee Friday night I can bring them to the meet and you can look at em.
Url

[jurkey77]

Awesome, sounds good to me. I'll drop by for coffee tomorrow at downtown timmys i think its set at. I'll bring the money and I'll definately take the mint tails off your hands. :D

[James Earl]

As the kids say "kewl"

[James Earl]

89+ tails sold to Jurkey77. Check the top for what I have left.

Thanks,
URL

[James Earl]

I still have:

A polished set of valve covers for a 7m-gte.
A not so mint set of 89+ tails. (the ends are good but there is a bit missing from the middle part)
N/A dash cluster.(Ready for the boost gauge mod)
AFM with electronics (I was thinking of polishing that too)
3 boxes of interior stuff, some switches & panels. (grey)
OEM R154 flywheel
1 used front rotor not on bad shape (other calliper seized so I replaced both sides) cheap not warped.
2 sets for front brake pads. (not used too much before the calliper seized) cheap fix if you need em.
TSRM 1988 Supra MK3 (good shape)
TSRM 1988 Supra MK3 (fair shape)
Toyota electrical schematics book (1990 MK3 I think)

[grandmaster]

you still have the antenae compartment cover? Is it maroon by any chance? If so, I need!!

[grandmaster]

and I'll trade you approximatly 3 cubic feet of freed space in your garage for those valve covers ...or some nice metallic blue ones

[James Earl]

I have no maroon stuff at all, sorry.

Are your valve covers just painted? I might work a deal with you on em, sort of a core exchange program for the polishing.

[grandmaster]

yep..just painted...

what sort of polishing equipment do you have? All I got is a dremmel and sandpaper. It takes a bloody long time for me, so that is why I havn't done the covers (and I havn't perfected my skills yet).

What does the core exchange program entail?

[James Earl]

Yeah I did mine that way....take em off for the winter and sand them while watching movies :lol:

I was going to buy a bench grinder with the stuff needed to polish them up a little faster this year. I was also looking to do a few 3000 pipes for the club while gettinga little coffee money out of it. Sort of a "good member" offering for the club.

I emailed you details on your hotmail acct. call me 265-6077

[James Earl]

I still have:

A Blue set of valve covers for a 7m-gte.
A not so mint set of 89+ tails. (the ends are good but there is a bit missing from the middle part)
N/A dash cluster.(Ready for the boost gauge mod)
AFM polished no eletronics.
AFM with electronics (I was thinking of polishing that too)
3 boxes of interior stuff, some switches & panels. (grey)
OEM R154 flywheel
1 used front rotor not on bad shape (other calliper seized so I replaced both sides) cheap not warped.
2 sets for front brake pads. (not used too much before the calliper seized) cheap fix if you need em.
TSRM 1988 Supra MK3 (good shape)
TSRM 1988 Supra MK3 (fair shape)
Toyota electrical schematics book (1990 MK3 I think)
3000 pipe
7M Intake manifold and TB.
7M Exhaust manifold.
7M starter
R154 shift knob assembly.
Pre 89 front park light assembly (L&R)
Yellow/orange side marker lights (L&R)
Fog light assemblys (89+ I think) with one good looking lens.
Black interior door pull handles
Power steering hoses.
Pre 89 front grill with Toyota badge on it.
Toyota grill badge
Lower bumper grill.
7M-GTE cam gear cover.
Two plastic coil pack & motor covers with Turbo badge on them.
3 Single fan A/C cooler fans on brackets
2 clutch fans


And much more to come later..
Url

[Deep_Blue]

This is how you polish something:

http://www.supraforums.com/forum/showthread.php?t=274253

Also mentions equipment to buy.

And I'm pretty sure there is no way to do a really good job without taking a long time.

Cheers,

Tim

[James Earl]

Thanks....So I was wondering how much you would pay for some of the parts polished up like that with a core exchange....I have all these extra parts but figured I would clean em up a bit first. If I buy a bench & the tools then it will be much faster than the valve covers I just swapped.

Just if I'm going to cook up a week of hours on something...I wanna know what it is worth.

Url.

[grandmaster]

Those blue valve covers, do they have any bolts or screws left on them? The previous owner was known to leave them in so that they wouldn't be lost. Let me know. Thanks

I also need the following items:
- the bit of hose that runs from the throttle body to the rear ict pipe
- screw to hold ict pipe
- one exhaust manifold bolt
- bit of hose that runs to charcoal cannister

let me know if you have any of these things...Thanks

[James Earl]

Grandmaster,
I will have to look for the bolts for you. I did not see any but I was not looking for them. As for the rest:

- the bit of hose that runs from the throttle body to the rear ict pipe
You mean the 3000 pipe to the IC piping? I do not have that.
- screw to hold ict pipe
I have that somewhere....maybe they are blue?
- one exhaust manifold bolt
Yes. U need nut or the stud or both?
- bit of hose that runs to charcoal cannister
Vac line? Yes.

Post a picture if you think it will help. Tonight is the only night i'll be home for awhile if you want to come by and pick up the stuff, call me.

[James Earl]

I still have:

A Blue set of valve covers for a 7m-gte.
A not so mint set of 89+ tails. (the ends are good but there is a bit missing from the middle part)
N/A dash cluster.(Ready for the boost gauge mod)
AFM polished no eletronics.
AFM with electronics (I was thinking of polishing that too)
3 boxes of interior stuff, some switches & panels. (grey)
OEM R154 flywheel
1 used front rotor not on bad shape (other calliper seized so I replaced both sides) cheap not warped.
2 sets for front brake pads. (not used too much before the calliper seized) cheap fix if you need em.
TSRM 1988 Supra MK3 (good shape)
TSRM 1988 Supra MK3 (fair shape)
Toyota electrical schematics book (1990 MK3 I think)
3000 pipe
7M Intake manifold and TB.
7M Exhaust manifold.
7M starter
R154 shift knob assembly.
Pre 89 front park light assembly (L&R)
Yellow/orange side marker lights (L&R)
Fog light assemblys (89+ I think) with one good looking lens.
Black interior door pull handles
Power steering hoses.
Pre 89 front grill with Toyota badge on it.
Toyota grill badge
Lower bumper grill.
7M-GTE cam gear cover.
Two plastic coil pack & motor covers with Turbo badge on them.
3 Single fan A/C cooler fans on brackets
2 clutch fans


And much more to come later..
Url

[James Earl]

Grandmaster,
I will have to look for the bolts for you. I did not see any but I was not looking for them. As for the rest:

- the bit of hose that runs from the throttle body to the rear ict pipe
You mean the 3000 pipe to the IC piping? I do not have that.
- screw to hold ict pipe
I have that somewhere....maybe they are blue?
- one exhaust manifold bolt
Yes. U need nut or the stud or both?
- bit of hose that runs to charcoal cannister
Vac line? Yes.

Post a picture if you think it will help. Tonight is the only night i'll be home for awhile if you want to come by and pick up the stuff, call me.


Another satisfied customer!

[grandmaster]

Thanks again Earl

[James Earl]

I still have:Updated April 2006.

A Blue set of valve covers for a 7m-gte.
A not so mint set of 89+ tails. (the ends are good but there is a bit missing from the middle part)
N/A dash cluster.(Ready for the boost gauge mod)
AFM polished no eletronics.
AFM with electronics (I was thinking of polishing that too)
3 boxes of interior stuff, some switches & panels. (grey)
OEM R154 flywheel
TSRM 1988 Supra MK3 (good shape)
TSRM 1988 Supra MK3 (fair shape)
Toyota electrical schematics book (1990 MK3 I think)
7M Intake manifold and TB.
7M starter
R154 shift knob assembly.
89+ front park light assembly (L&R)
Yellow/orange side marker lights (L&R)
Fog light assemblys (89+ I think) with one good looking lens.
Black interior door pull handles
Power steering hoses.
7M-GTE cam gear cover.
Two plastic coil pack & motor covers with Turbo badge on them.
3 Single fan A/C cooler fans on brackets
2 clutch fans


And much more to come later..
Url