PDA

View Full Version : H&R Lowering Springs


James Earl
11-17-2005, 12:54 PM
OK so I never did do the review...I forgot I was going to sell these.

So here is my review:

They are short and bumpy but really not too bad. Even with the TEMS set at soft this makes your car feel tight. With the full firm mod the car feels like it has almost no springs. If that is what you like then great! I find it too tight but still much better than stock sponge stuff.

I did have the chance to feel Trowas coil-overs and found them really tight but I did not know what he had them set at and if you are planning on auto-x or road track racing they would be the best choice.

The white car I was selling this spring had ST springs. I have been told that they are made to the same spec as TRD springs and would be the best match for the car. I was very impressed with the ride and handling of this car with the ST’s on it. At first I thought my car was better but as I drove the white car I found that the ST’s had the same corner holding with out the harsh ride I was getting from the H&R’s. In my mind if you are on a budget and are upgrading the springs go with the ST’s

bboy_leathel
11-17-2005, 05:19 PM
how much are the H&R lowering spings

James Earl
11-17-2005, 06:17 PM
H&R Lowering Springs currently sell for just under $400 US!

These springs are great for rail like performance and the maximum drop for the Supra. They are not good if you want to do auto-x and several trips to Vancuver etc. Thats why I am selling them.
http://www.europerformance.co.uk/images/products/large/29644.jpg