Gauges

[89Supra]

I finally picked up one of my gauges for the pillar pod but i dont know where to pull the power from.
Can someone give me any ids or help me on on this project?

Thx in advance
Scott

[Supra_devil]

I would run a power wire to under the dash from the battery and set up a little distribution box, then use switched power from the stereo or cigarette lighter with a relay for the on/off.

[spanky]

You can take power from the ign switch in the steering collum ,find one that is powered with the key on and tap into it . Solder the connection and use a fuse .