PDA

View Full Version : 1985 Cressida.

Sentara
06-22-2005, 11:41 PM
HI all.

Name it, and I'll tell you if I still have it.
josh_laton
06-23-2005, 08:33 PM
do you have anything aftermaket?
James Earl
06-23-2005, 09:02 PM
you have the whole car?
Sentara
06-23-2005, 10:46 PM
Sorry Earl, guess I should be a bit mor specific.

Zero aftermarket.

I have the whole car minus the block, and a few odd items like light cover's center caps are no longer there as well.

So, name it, I may have it, basically give away prices.
James Earl
06-23-2005, 10:54 PM
how bad is the body?
Sentara
06-24-2005, 12:16 AM
A few dings here and there, the usual wheel well rust, dull paint, no major dents...

Have had the car for a year and a half, starting blowing to much smoke so I decided to retire her.

Next question Earl : )
Supra_devil
06-24-2005, 12:44 AM
well if all it needs is a motor, then theres at least one cressida at karbashers, an 86.
or a 7M could go in it, or a 7mgte, or order a 190hp 6M from rabidchimp for 1200 USD. or go all out and get an aluminum V8 and work it, hehehehe.
James Earl
06-24-2005, 08:05 AM
Thats my thinking....How much does the car weigh? I have been looking into my next project as this car is almost done. I would like to stay with the 7m as I know it somewhat. so I will keep asking questions. Has the motor been pulled or is it just fried?
Sentara
06-25-2005, 09:28 PM
Hi,

Engine is pulled.

Earl. Supradevil.

20 year old car. It's going to need more than just an engine.

Wheel bearings, steering rack, struts, brakes, lsd is worn out...on and on. If you want to fix up a 85 Cressida and go say 7m, you will want a mint base [like my other cressy] .

If you want a 7m 85 Cressida just to bag, grab this and make it go, haha.

By memory, 85 Canadian Cressida, sedan 3135lbs wagon 3080lbs
GOT_BOOST
06-26-2005, 12:38 AM
I can do wheel bearings! :thumbup:

I want to learn how to paint also!

Mike Nikolai
Supra_devil
06-26-2005, 01:19 AM
wheel bearings are a 20 minute job for fronts, struts put in mk2 ones with ST springs, brakes, do with bearings. LSD, put in a mk2 lsd or upgrade to a truetrac. its all dependant on the body condition, everything else is just bolts.
i thought that they were lighter than that though.
josh_laton
07-01-2005, 10:31 PM
can i get the gas cap if you still have it. and also the grill. thanks
josh_laton
07-03-2005, 09:07 PM
I also need the front liup too plz
Sentara
07-04-2005, 04:29 PM
Hey guy's

If you want something, PM me, come check out the car and we can go from there.

Thanks.